Digital Intelligent Double Clamp Phase Volt Ampere Meter Measurement Gauge
Can read, save, report, print history data, etc. Phase：0.0°～360.0°. Clamp：Φ8mm. Phase：0.1°. Current clamp length：2m. Power factor：-1～+1. Power factor：0.001. Data Hold：Press the HOLD button during the test to hold the data, the “DH” symbol is displayed.
Large Caliber Double Clamp Digital Phase Voltmeter AC Current Voltage Tester
Simultaneous phase test between UI, II and UU range : 0.0° ~360.0 °. Phase ： 0.0 °～ 360.0 °. Round type current clamp: 35mm × 40mm. Phase ： 0.1 °. Current ： AC 0.0mA ～ 600A. Current ： AC 0.1mA. Input Impedance.
Double Clamp Digital Phase Voltmeter AC Current Voltage Tester RS232 Interface
Can read, save, report, print history data, etc. RS232 Interface. Phase ： 0.0° ～ 360.0°. Sharp-nose current clamp: 7.5mm×13mm. Phase ： 0.1°. Current ： AC 0.0mA ～ 20.0A. Current ： AC 0.1mA. Input Impedance.
Three Phase Digital Phase Voltmeter Volt-Ampere Meter AC Voltage Current Tester
Phase range ： 0.0 °～ 360.0 °. Phase ： 0.1 °. Current range ： AC 0.0mA ～ 20.0A. Current ： AC 0.1mA. Input Impedance. Phase Sequence. Current vector sum range ： 0mA ～ 60.0A. Current vector sum: 1mA.
0~360 Angle Double Clamp Digital Phase Meter for Phase Sequence Tester
0~360 Angle Double Clamp Digital Phase Meter for Phase Sequence Tester △Double Clamp Digital Phase Voltmeter is a multifunctional instrument specially designed for field testing, with high accuracy, high stability, low power consumption and easy to use and other features. It can direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc. △ Double Clamp Digital Phase Voltmeter adopt super large LCD display screen, digital high 40mm, and with white screen backlight, display clear and obvious, shows the exquisite and luxurious appearance. △ Double Clamp Digital Phase Voltmeter suitable for electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutes, metrology departments, etc 1. Direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc. 2. Voltage Range：0~500V； 3. Current Range ：0~10A； 4. Phase Range ：0~360°； 5. CT Size：Φ8mm Technical Parameters Function Description Function Direct testing of the phase, AC current, AC voltage, AC leakage current, phase sequence; differentiate transformer group, inductive, capacitive circuit n; indirect testing of power factor, power. Power Supply DC9V LR61.5V AAX6PCS Working Current Open backlight max 35mA,the battery continues working about 15 hours; Close backlight, the meter power consumption about 5mA,the battery continues working 100 hours Display Mode LCD display, white screen backlight function, suitable for dark places LCD Size LCD Size:70mm×62mm； Display Area:64mm×54mm Meter Dimensions 196mm×92mm×54mm Sampling Rate About 3 times/second Range AC Voltage: 0～20V/200V/500V AC Current: 0～200mA/2A/10A Phase: 0～360° The amplitude range of the tested singal in measuring phase Measure phase U1-U2：30V～500V； Measure phase I1-I2：10mA～10.00A Measure phase U1-I2 or I1-U2：10V～500V、10mA～10.00A Data Hold In measurement, press HOLD key to hold data，“DH” symbol display Auto Shut Down 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption Voltage Detection When the battery voltage is lower than 7.8-8V, low battery symbol display,and remind to replace the battery. Meter Weight Host: 550g(with battery) ; Current Clamp: 170g x 2; Test wires : 250g Test Wire Length 1.5m Current Clamp Wire Length 2m Working Temperature -10℃～40℃； below 80%Rh Store Temperature -10℃～60℃； below 70%Rh Input Impedance Test voltage each gears input impedance: 1MΩ; Measure phase U1U2 voltage input impedance :40KΩ Withstand voltage It took 1 minute to withstand 1000V/50Hz sine wave AC voltage between the meter line and the out shell. Insulation ≥10MΩ between the instrument line and the casing, between the two voltage input terminals Structure Double insulation Packing: Package Outer Package Carton Inner Package Aluminum box Accessory Host 1 PCS Instrument Case 1 PCS Current Clamp 2 PCS Test Wires 4 pcs （red 2 pcs，black 2pcs ） Manual , Warranty Card ,Certificate 1pcs
Large Caliber Clamper Three-phase Digital Phase Voltmeter Voltage Current Tester
Large Caliber Clamper Three-phase Digital Phase Voltmeter Voltage Current Tester Note: Battery cannot be included during the shipping !!! Introduction: Large Caliber Three-phase Digital Phase Voltmeter is a multifunctional, digital and intelligent instrument specially developed by our company for field testing. It has the characteristics of high accuracy, high stability, low power consumption and convenient to use etc. Under the condition of the tested circuit does not open-loop, it can measurement of three-phase AC voltage, current, phase between voltages, phase between current, phase between current and voltage, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum, judge transformer wiring group, sensibility and capacitive circuit, test the secondary circuit and differential bus protection system, read the phase relationship between differential protection between each groups CT, check watt hour meter wiring correctly or not, maintenance line equipment, etc., To provide a safe, accurate and convenient new power meter for electricity inspectors.Large Caliber Three-phase Digital Phase Voltmeter with shake proof, skid proof, and high insulation sheath. Adopts 240dotsX160dots LCD screen, dynamic display, vector diagram indication, clear and obvious, which shows the exquisite and luxurious appearance. The instrument adopt large caliber current clamp, suitable for testing of thick conductor and large current place.Large Caliber Three-phase Digital Phase Voltmeter also name intelligent three phase digital phase voltmeter, multifunction three phase digital phase voltmeter and three clamp digital phase voltmeter etc. Suitable for electric power, petrochemical, metallurgy, railway, industrial and mining enterprises, scientific research institutions, measurement departments. It is especially suitable for electric energy billing system and relay protection system. Function:Simultaneous measurement of three AC current, range: 0.0mA~600ASimultaneous measurement of three AC voltage, range: 0.00V~600VSimultaneous measurement of UU, II, UI phase, range: 0.0°~360.0°Measurement frequency, phase sequence, active power, reactive power, apparent power, power factor and other parameters.Judgement of transformer wiring group, inductive, capacitive circuit and maintenance line equipment, etc. Specifications: Power SupplyDC9V alkaline batteries(1.5V LR6×6) (not included)Clamp35mm x 40mmLCD240dotsX160dotsRangeVoltage:AC 0.00V~600VCurrent:AC 0mA~600APhase:0.0°~360.0°Frequency:45.00Hz~65.00HzActive power:0.0W~240kWReactive power:0.0VAR~240kVARApparent Power:0.0VA~240kVAPower factor :-1~+1Current vector:0A~18000AResolutionVoltage:AC 0.01VCurrent:AC 1 mAPhase:0.1°Frequency:0.01HzActive power:0.1WReactive power:0.1VARApparent Power:0.1VAPower factor:0.001Current vector: 0.1AAccuracy±0.5% rangeDate Storage500 setsData upload functionUSB interface, the stored data upload computer, easy to analyze management dataAuto Power-off15 minutes off automaticallyPower ConsumptionWith backlight: MAX working Current about 80mA, the battery can work continuously for 8 hourswithout backlight: working current about 50mA,the battery can work continuously for 12 hoursWorking environment-10℃~40℃; below 80%RhStore environment-10℃~60℃; below 70%RhPhase sequencePositive: U1, U2, U3 or I1, I2, I3 The cursor flashes from left to rightInverting: U1, U2, U3 or I1, I2, I3 The cursor flashes from right to leftThe phase range of the measured signal when measuring phaseMeasuring U1-U2 phase: 30V ~ 500VMeasuring U1-I2 orI1-U2 Phase:10V~500V,10mA~10.00ATest line length1.5mCurrent clamp length2mmeasure time2s/timeData HoldPress the HOLD button during the test to hold the data, the “DH” symbol is displayedinput resistanceTest voltage input impedance is:1MΩLow batteryWhen battery voltage decreases to about 7.2V, battery voltage low icon will display, reminding to replace battery. (not included)Withstanding VoltageBetween the instrument line and the shell to withstand 1000V / 50Hz sine wave AC voltage for 1 minuteInsulationBetween the meter line and the jacket shell ≥ 100MΩStructureDouble insulated, with insulated vibration-proof jacketProtection TypeIEC61010-1 CAT Ⅲ 600V, IEC61010-031, IEC61326, Pollution 2Weight1360gDimension196mm×92mm×54mm Packing: PackageOuter PackageCartonInner PackageAluminum caseAccessoryMeter1 PCSCurrent Clamp3 PCSTest Wire4 PCSCommunication Cable1 PCSSoftware CD1 COPYAluminum case1 PCSManual1 PCSCertificate1 PCSWarranty Card1 PCS
Double Clamp Phase Voltmeter for Single-phase AC Phase Current Voltage AC 0A～20A
Clamp Jaw Size Φ8mm. Phase 0～360° 1° ±1°. Phase: 0～360°. AC current: 0～200mA/2A/20A. The test line adopts a special power cable, and the elastic rod plug and alligator clip are insulated and protected.
Double Clamp Digital Phase Voltmeter with 0.0mA~20.0A Phase 0~360° Φ8mm 600V
Clamp Jaw Size Φ8mm. Phase 0～360° 1° ±1°. Phase: 0～360°. The test line adopts a special power cable, and the elastic rod plug and alligator clip are insulated and protected. Data Hold Press the HOLD key to hold the data during the test, and the ”DH” symbol is displayed.
LCD Digital Car Compass LED 12V Voltage Meter Time Clock Thermometer w/Backlight
Press the button on the side to change the backlight to blue and orange. Clock / year / month / date. LCD digital display, easy to read. Connect the plug to the car cigarette socket, put the temperature sensor outside and hang it on the edge of the car door, then run the car.
Digital Double Clamp Phase Voltmeter with Jaw Size Φ8mm USB Interface
Clamp Jaw Size ： Φ8mm. Phase: 0～360°. Display Mode ： LCD display, white screen backlight function, suitable for dim places. The test line adopts a special power cable, and the elastic rod plug and alligator clip are insulated and protected.