Digital Haze Tester Meter Transmittance Gauge Meter For Glass Plastic Film
Digital Haze Tester Meter Transmittance Gauge Meter For Glass Plastic Film Introduction:The haze meter can easily achieve ASTM D1003 non-compensation method, full light transmittance, haze test.Open sample bin can be vertically and horizontally tested to accommodate more samples to be tested.The haze meter uses a PD array detector to meet the CIE V(λ)2 degree visual response. The compensation method can be used to measure the light transmittance and haze with high precision and repeatability. Technical Advantage: 1、Conform to ASTM standardCan meet the requirements of different users of the test standard, in line with the standard: ASTM D1003/1044, GB/T 2410, JJF 1303-2011, CIE 15.2, JIS K7105, JIS K7361, JIS K 7136.2.Easy operation and faster and more accurate measurementThe Haze Meter is equipped with a large-size touch operation screen, easy and convenient to operate, using the PD array detector, to meet the CIE V (λ) 2 degrees of visual response can be realized with high precision and repeatable transmittance and haze measurements. usb data output device, can be docked with the laboratory system.3.Dynamic measurement Independent light source detector and temperature sensor, always monitor the light source and environmental changes, to ensure that the test data is reliable.4.Convenient measurement and wide sample adaptationOpen measurement area, vertical and horizontal testing, adapt to more samples to be measured5.Quality management softwareProvides powerful haze and transmittance measurement and analysis software for quality control and tabular management of haze and transmittance data in various industries. The user’s management in the PC computer terminal data, comparison of haze, transmittance difference, generate test report form, convenient for customer customization and management work. Lighting TypeTransmission: 0/D (Parallel light illumination, diffuse Reception)characterizationInstrument can easily realize ASTM D1003 non-compensated method, full transmittance, haze test. open measurement area for vertical and horizontal testing.Integrating sphere sizeΦ154mmLighting sources400~700nm combination LED light source.Spreading method/inductor PD array detector meeting CIE V(λ)2 degree visual responseMeasurement wavelength range/wavelength interval/half-bandwidth/Transmission rate measurement range0~100%Measuring caliberΦ20mm/Φ15mm/Φ8mm/Φ4mm (select single caliber)Sample sizeThickness less than 170mmcolor space/Color difference formula/Other Colorimetric IndicatorsHaze (ASTM D1003/1044), Transmittance T (ASTM)observer’s perspective2°observation sourceD65,A,CdemonstratePass/fail resultsmeasuring timeAbout 1.5sHaze Resolution0.1 unitHaze repeatabilityΦ20mm caliber, less than 0.15 or less (after the instrument is preheated and calibrated, the standard haze film with a haze of about 30 is tested for 30 standard deviations at intervals of 5s).desk-to-desk differentialΦ20mm caliber, less than 0.5 or less (standard deviation of the standard haze film from the reference value at 5s intervals after the instrument is preheated and calibrated)sizesLxWxH=LxWxH=290X211X511mmweightsApprox. 4.0kgPower supply methodDC 24V,3A power adapter power supplyLighting source lifeMore than 3 million measurements over 5 yearsScreenTFT True Color 7inch, Capacitive Touch Screenconnector USB, Print Serial PortStored Data1,000 standard samples, 10,000 specimensOperating Temperature Range0~40℃（32~104°F）Storage temperature range -20~50℃（-4~122°F）