SYS-B/C Foundry Sand Hardness Tester Clay Green Sand Surface Hardness Meter
Compression Stroke 2.50mm 2.50mm. Accuracy Tolerance 1. Force tolerance of indenter at any reading: ±5%.
SYS-B/C Foundry Sand Hardness Tester Clay Green Sand Surface Hardness Meter
Compression Stroke 2.50mm 2.50mm. Accuracy Tolerance 1. Force tolerance of indenter at any reading: ±5%.
SYS-B Sand Hardness Tester Foundry Clay Sand Green Sand Surface Hardness Tester
Because their quantity depends and corresponds, the values of hardness are large when the value of a unit is large (g / mm2). Model: Apply dough hardness t o high sand molding pressure. The sand surface is hard as: AB, C, three models, of which.
Sand Mould Surface Hardness Tester Meter Gauge Durometer with Maximum Load 980G
Maximum load: 980G. Because their quantity values are related and consistent, the values of hardness are large when the unit value is large (g/mm2). Outline size: 90 x 55 x 28mm. Load under pressure: 50g.
Sand Mould Surface Hardness Tester Meter Gauge Durometer with Maximum Load 980G
Maximum load: 980G. The test is similar to the Brinell Hardness Test-the softer the mould surface, the greater the penetration of the probe into the mould. Outline size: 90 x 55 x 28mm. Load under pressure: 50g.
Digital Sand Mould Surface Hardness Tester with Load 980g To Load 50g Unit HB
The unit of type B hardness tester for sand mold surface is (g/mm2), but it is customary to use hardness H(A/B/C) instead of unit. Because their values are related and consistent, the corresponding hardness value is also large when the unit value is large (g/mm2).
Sand Mould Hardness Tester for Fine/Coarse Sand with Load 980g Digital Display
The unit of type B hardness tester for sand mold surface is (g/mm2), but it is customary to use hardness H(A/B/C) instead of unit. Because their values are related and consistent, the corresponding hardness value is also large when the unit value is large (g/mm2).
Sand Mould Hardness Tester for Moulding Sand Testing with Maximum Load 980g
Maximum load: 980G. The test is similar to the Brinell Hardness Test-the softer the mould surface, the greater the penetration of the probe into the mould. Load under pressure: 50g. Accuracy: When the pointer is at any value, the relative force of the pressure head is equal to + 5%.
Digital Force Gauge Push Force & Pull Force Tester With External Sensor 100kgf
Safe Load: 150%FS(Buzzer Alarm Over 110%FS). It is widely used in electronics, building hardware, etc. Standard Accessories: Digital Force Gauge; Pulling Hook; Flat Tip; Cone Tip; V-shaped Groove Tip; V-shaped Wedge Tip; Lengthening Connection Rod(Screw Rod, Cap Nut)Manual; Carrying Case.
Sand Mould Surface Hardness Tester Hardness Testing with Maximum Load 980G
Outline size:90 x 55 x 28mm. Maximum load:980G. Load under pressure:50g. Head shape and size:Ball R12.70. Model:B type.