Milwaukee MI407 Ammonia Low Range PRO Photometer for Aquariums
This feature ensures consistency across multiple users. Accurate to ±0.09 mg/L @ 1.50 mg/L and a range 0.00 to 3.00 mg/L of (NH3-N). Light Detector: Silicon photocell and 466 nm narrow band interference filter.
Milwaukee SE220 pH Electrode / Probe replacement for MW100 MW101 MW102
International Buyers – Please Note: Customs and brokerage fees, import duties and taxes are not included in the item price or shipping cost. These charges are your responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying. Avogadro’s Lab Supply Milwaukee SE 220 pH Electrode The SE220 double junction pH probe can be used with all the MW100, MW101 or the MW102 pH meters. It is supplied with a 1 meter cable with a BNC connector. Features KCl gell filled Shaft Material Epoxy 6 month manufacturer warranty SPECIFICATIONS pH Range 0.0 to 14.0 pH Temp range -5 to 40°C / 23 to 104°F Reference Electrolyte KCL gel Connector BNC Cable Length 1 m Shaft Length / Diameter 75 x 6 mm All merchandise offered by Avogadro’s Lab Supplyis New from the manufacturer! Don’t forget to visit my for great deals on all your lab supply needs!!!
Milwaukee 49-77-1003 CAT IV 600V/CAT III 1000V Universal Electrical Test Leads
• (1) Black test lead. • (1) Red test lead. • UL approved for improved safety. Full Factory Warranty. • Maximum Current 10A. Model MILW 49-77-1003.
Digitial Circuit Breaker Finder with Non-Contact Voltage Detector
With the LED work light, you can easily work in dark areas with more visibility, and the over molded grip provides durability and comfort for all applications. The LCD backlit display provides a clear and accurate temperature reading when used in applications.
Digitial Circuit Breaker Finder with Digital GFCI Receptacle Tester
With the LED work light, you can easily work in dark areas with more visibility, and the over molded grip provides durability and comfort for all applications. The Milwaukee Digital GFCI Receptable Tester is designed to reduce the risk of electrical shock generated from outlets.
Digitial Circuit Breaker Finder with Digital GFCI Receptacle Tester
With the LED work light, you can easily work in dark areas with more visibility, and the over molded grip provides durability and comfort for all applications. The Milwaukee Digital GFCI Receptable Tester is designed to reduce the risk of electrical shock generated from outlets.
Milwaukee MW301 Smart EC Conductivity Meter In Box – New Old Stock
There is always a possibility of a typo or a an error that can potentially be made on our end without the intent of doing so.
Milwaukee MA920B/1 Direct Measurement Food Grade pH Probe
DESCRIPTIONThe MA920 probe is a food grade probe for use with the MW101 or MW102 PRO pH meters.DESIGN FEATURESThe Milwaukee food grade probe is specifically designed for the pH analysis of semisolid foods such as processed meats, soft cheeses, soups, sauces, and sushi rice.Top features include:OPEN JUNCTIONThe open junction design reduces clogging from suspended solids and proteins found in food and dairy products for a more stable pH measurement and reduced maintenance.CONICAL GLASS TIPThe conical shaped tip design allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in a variety of food products.PVDF BODYPolyvinylidene fluoride (PVDF) is a food grade plastic that is resistant to most chemicals and solvents used for disinfection in the food sector, including chlorine (bleach).USE AND CAREpH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe’s cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.SPECIFICATIONSpH Range: 0 -12Temperature Range: -5 – 40 C / 23 – 104 FBody Material: PVDFReference Electrolyte: Viscolene GelReference Type: Singe, Ag / AgClReference Junction: OpenMax Pressure: 0.1 barTip Shape: ConicDiameter: 0.24 inchesBody Length / Overall Length: 2.95 / 5.1 inchesCable length: Coaxil, 3.3 feetConnection: BNCMade in ITALY
Milwaukee 2210-20 Fluorescent Lighting Tester Lamp Ballast Pin Tester Used
Type: Fluorescent Lighting Tester / Lamp and Ballast Tester. Used Milwaukee 2210-20 Fluorescent Lighting Tester in good pre-owned condition. Model and serial label are intact. Batteries are not included unless shown.
MILWAUKEE 2309-20 M-SPECTOR 3FT INSPECTION CAMERA SCOPE KIT (9MM)
Tested and fully functional. Ideal for detailed inspections in tight spaces. No accessories included.